Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT
¥ 14,800 税込
商品コード：
関連カテゴリ
※ご自身でCLI入力、水平出し、フライト調整などができる方以外はおすすめできません
単に『自分で作った方が安いから』という理由のみで検討されている方には、完成機をおすすめします。
2インチクラスのガード付き自作キット！
ブラシレスマイクロシネマドローン！
室内でも屋外でもフライトできる小型ドローン！
プロペラを破損することがないのでとても経済的！
バッテリーまで付属した作りやすいDIYキットです！
※受信機はSPI内蔵式 Frsky/SFHSSなど切り替え可能
※2インチペラ適合
Features:
No Solder work need and easy to build
Very reliable and resistant to drops
Stable and smooth flying
Insta360 fixed mount ready
Smooth and powerful
Diversity SPI Receiver compatible Frsky/S-FHSS/Redpine protocol
【仕様】
Brand Name: Happymodel
Item Name: Cine8
Wheelbase: 85mm
Size: 145mmx140mmx23mm
Weight: 73g(without battery)
Weight: 99g(with Insta360)
Receiver option:
Internal SPI Frsky version (Compatible with Frsky ACCST D8/D16, S-FHSS, Redpine)
External Flysky Fli14+ receiver version(Compatible with Flysky AFHDS-2A protocol radio)
External TBS Crossfire Nano receiver version
Motor:
Mode: EX1202.5 KV8000
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
Weight(g):4.4g
No.of Cells(Lipo):2-3S
Propellers:
Material:PC
Weight:0.91g
Pitch:2in
Props Dia:50.3mm
Center Thickness:4.5mm
Center Hole Dia:1.5mm 3 holes
Flight controller:
(S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR
R MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7V-17V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC
Onboard 4in1 ESC:
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version:
CC2500 Hardware
Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
Channels: 8ch
Failsafe support
Diversity 2.4G receiver system
No ground interference: above 300meter
External Flysky Fli14+ receiver:
Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 50mm (single antenna)
Input Power: 4.0-6.5V DC
Weight: Only 1g
Size: 19.5mm*12mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference: >500m
External TBS CRSF Nano receiver:
Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible
5.8G 400mw VTX:
Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
SmartAudio ready
Caddx ANT 1200tvl camera:
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Weight: 2g (N.W.)
【セット内容】
1x Cine8 Frame
1x CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS
4x Happymodel EX1202.5 KV8000 brushless motor
1x Gemfan D51(2020-4) Cinewhoop Props
1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
1x 5.8G 25mw~400mw Whoop_VTX_HP
1x TypeC USB Adapter
1x Tattu 3S 11.4V 450mah battery
Note:Insta360 go is not include.